Description
Acetyl Chloride gas LEL detector – flameproof sensor transmitter – ATEX, SIL 2, Zone 1, 2
online, continuous detection and monitoring of LEL or flammable level of acetyl chloride vapour or gas in ambient air or ducts, flameproof / explosion proof certified Zone 1, 2 – ATEX, SIL 2, with / without display, contact relays, flashing alarm LEDs, RS485 serial interface
Model: S2XX7
Acetyl Chloride is colorless, fuming liquid with a pungent odor. It is high flammable, water reactive and air reactive chemical. Acetyl chloride is a reagent for the preparation of esters and amides of acetic acid, used in the derivatization of alcohols and amines.
Acetyl Chloride vapor irritates mucous membranes. Ingestion of liquid or contact with eyes or skin causes severe irritation
SMART S series acetyl chloride gas or vapour sensor transmitter is highly robust, industrial grade, flameproof or explosion proof instrument for LEL concentration detection. The instrument can be installed for flammability level or LEL detection of acetyl chloride vapour or leakage in all industrial and commercial area eg. chemical plant, solvent manufacturing unit, polymer industry, manufacturing plants, warehouse etc
The detector can be installed at walls, surfaces or in ducts for monitoring in gas or air sample. It is ATEX EEx’d’ certified with SIL 2 safety integrity level for hazardous area installation Zone 1 and 2.
The sensor transmitter offers linear, proportional analog output in industry standard current signals, over measuring range of 0 ~ 100% LEL (lower explosive limit). The detector works on highly sensitive catalytic bead based pellistor sensor cell, with low response time. It has unique feature of auto diagnostic watch dog with zero point tracking feature. Due to its 10-bit microprocessor based control unit, it offer high accuracy over long term. The detector is also equipped with sintered filter with flashback arrestor for enhanced safety.
Key Features:
- Catalytic bead based Pellistor sensor cell with low flash energy
- 10-bit microprocessor control unit
- Non-intrusive one-man calibration via hall effect switches
- ATEX certified explosion proof / flameproof, suitable for Zone 1, 2 gas explosion installation
- Linear, proportional analog industry standard current output
- Continuous system self-diagnosis with watch dog
- Flashback arrestor with sintered filter
- Auto Zero point tracking to zero point compensation
- SIL 2 HW TUV certified
- RS485 serial interface with Modbus RTU communication (optional)
- 1 or 3 relay output module (optional)
- System and alarm LED indicators (optional)
- Modbus RTU communication over RS485 serial interface
Technical Specifications:
- Measuring Parameters: LEL or flammable concentration of acetyl chloride gas (5.0% v/v)
- Sensor Technology: Catalytic bead based pellistor sensor cell
- Measuring range: 0 ~ 100 % LEL
- Response time (t90): < 30 sec
- Control unit: 10 bit microprocessor based
- Warm up time: < 5 mins
- Auto zero point tracking for drift compensation
- Power supply: 24V DC
- Ingress protection: IP65
- Enclosure: Stainless steel (for sensor cell), anti-static epoxy coated metal alloy (for transmitter)
- Output: linear, proportional 4-20mA
- Mounting: wall, duct, pipeline
- Safety integrity level: SIL 2
- ATEX marking:
- CE 722 Ex II 2G EEx d IIC T6
- CE 722 Ex II 3G EEx nA IIC T6
- Optional: LCD Display, alarm LEDs, potential free relay contacts
- Hazardous area: Zone 1, 2
Application:
- Manufacturing plants
- Chemical plants
- Petrochemical units, polymer
- Warehouse, chemical storage
