Description
Cyclohexanol gas LEL detector – explosion proof sensor transmitter – ATEX, SIL 2, Zone 1, 2
online, continuous detection and monitoring of LEL (flammability) of Cyclohexanol gas / vapour in air or gas stream ducts, flameproof / explosion proof certified Zone 1, 2 – ATEX, SIL 2, with / without display, contact relays, flashing alarm LEDs, RS485 serial interface with Modbus RTU protocol
Model: S2XX7
Cyclohexanol is the organic compound with the formula (CH2)5CHOH. The molecule is related to cyclohexane ring by replacement of one hydrogen atom by a hydroxyl group. This compound exists as a deliquescent colorless solid with a camphor-like odor, which, when very pure, melts near room temperature.
SMART S series cyclohexanol gas sensor transmitter or detector is highly robust, industrial grade, flameproof or explosion proof instrument for LEL concentration detection. The instrument can be installed for flammability level or LEL detection of cyclohexanol concentration or leakage in all industrial and commercial area eg. chemical plant, solvent manufacturing unit, polymer industry, manufacturing plants, warehouse etc
The detector can be installed at walls, surfaces or in ducts for monitoring in gas or air sample. It is ATEX EEx’d’ certified with SIL 2 safety integrity level for hazardous area installation Zone 1 and 2.
The sensor transmitter offers linear, proportional analog output in industry standard current signals, over measuring range of 0 ~ 100% LEL (lower explosive limit). The detector works on highly sensitive catalytic bead based pellistor sensor cell, with low response time. It has unique feature of auto diagnostic watch dog with zero point tracking feature. Due to its 10-bit microprocessor based control unit, it offer high accuracy over long term. The detector is also equipped with sintered filter with flashback arrestor for enhanced safety.
Key Features:
- Catalytic bead based Pellistor sensor cell with low flash energy
- 10-bit microprocessor control unit
- Non-intrusive one-man calibration via hall effect switches
- ATEX certified explosion proof / flameproof, suitable for Zone 1, 2 gas explosion installation
- Linear, proportional analog industry standard current output
- Continuous system self-diagnosis with watch dog
- Flashback arrestor with sintered filter
- Auto Zero point tracking to zero point compensation
- SIL 2 HW TUV certified
- RS485 serial interface with Modbus RTU communication (optional)
- 1 or 3 relay output module (optional)
- System and alarm LED indicators (optional)
- Modbus RTU communication over RS485 serial interface
Technical Specifications:
- Measuring Parameters: LEL or flammable concentration of Cyclohexanol gas (1.00% v/v)
- Sensor Technology: Catalytic bead based pellistor sensor cell
- Measuring range: 0 ~ 100 % LEL
- Response time (t90): < 30 sec
- Control unit: 10 bit microprocessor based
- Warm up time: < 5 mins
- Auto zero point tracking for drift compensation
- Power supply: 24V DC
- Ingress protection: IP65
- Enclosure: Stainless steel (for sensor cell), anti-static epoxy coated metal alloy (for transmitter)
- Output: linear, proportional 4-20mA
- Mounting: wall, duct, pipeline
- Safety integrity level: SIL 2
- ATEX marking:
- CE 722 Ex II 2G EEx d IIC T6
- CE 722 Ex II 3G EEx nA IIC T6
- Optional: LCD Display, alarm LEDs, potential free relay contacts
- Hazardous area: Zone 1, 2
Application:
- Polymer manufacturing
- Chemical plants
- Petrochemical units, polymer
