Fischer DE45 Ex – Explosion proof DP Transmitter, switch – Zone 2, 22

Fischer DE45 Ex (DE45…R for Zone 2, DE45…S for Zone 22) is micro-controlled based, high accuracy explosion proof or flameproof pressure instrument with limit contacts / switch for monitoring differential pressure, positive or negative pressure or vacuum pressure.

It is suitable for all clean air or gaseous media, in Zone 2, 22 hazardous area location. It offer two configurable limit contacts, inbuilt LED display and programmable analog output with signal conversion table.


Fischer DE45 Ex – Digital Sensor DP Transmitterpdf-image – Zone 2, 22

Explosion proof, microprocessor based signal processing, with LED display, differential pressure transmitter with limit contacts for positive, negative, vacuum monitoring for air, clean gases
Make: Fischer Messtechnik (Germany)atex-explosion-image
Model: DE45…R (for gas explosion proof Zone 2),  DE45…S (for dust explosion proof Zone 22)

Fischer DE45 multi-functional pressure instrument which combines digital readout, dual limit detection relays and optional transmitter output. The instrument consist of microprocessor based electronic unit to process signals and transit over analog signals.

It can measure positive gauge, negative or differential pressure of two independent gas or air pressure sources.

It comes in explosion proof version as DE45…R (for zone 2, gas explosion proof) and DE44…S (for Zone 22, dust explosion proof).

  • DE45..R: Suitable for use as electrical equipment for use in explosion – hazardous area (flammable gas) Zone Declaration per Directive 94/9/EC (ATEX)
    Ex II3G EEx nA IIC T4    (-10° C < Tamb < +60° C)
  • DE45..S: Suitable for use as electrical equipment for use in explosion – hazardous area (flammable dust) Zone 22
    Declaration per Directive 94/9/EC (ATEX)

    Fischer DE45 Ex - digital DP Transmitter (DE45..R, DE45..S) with limit switch
    Fischer DE45 Ex – digital DP Transmitter (DE45..R, DE45..S) with limit switch

    Ex II3D IP65 T125° C

Working Principle:

DE45 Ex is based on piezo-resistive sensing element and can measure positive gauge, negative gauge (vacuum) or differential pressure. The pressure is measured directly by piezo-resistive resistance bridge that is formed on surface of an integral silicon diaphragm in each sensor chamber.

The change in pressure results in change of resistance that is converted to varying voltage and which in turn convert to digital signals. The instrument’s internal micro-controller transfers measured value to LED Display, control two limit detection contacts/ relays, and transmit measured values through analog conversion stage as voltage or current signal.

An optional output signal can be slew limited, spreaded, inverted and transformed non-linearly by means of table function.


Key Features:

  • Robust design, over-pressure protected
  • Selectable pressure unit
  • Signal output with possibility of spreading and inverting characteristic curve with any offset (optional)
  • Characteristic conversion of output via 3….30 entries tablets)
  • Fully programmable via PC based EU03 module
  • Large LED Display

Key Specifications:

  • Measuring range: 0 ~ 4.0 mbar up to 0 ~ 250 mbar; ± 2.5 mbar to ± 60.0 mbar
  • Maximum static operating pressure: 50 mbar to 500 mbar
  • Maximum safe pressure: 150 mbar to 1500 mbar
  • Straight line deviation error (max): 1.0% full scale
  • Pressure connection: threaded hose clamp connectors (aluminum) for 8/6 or 6/4 mm hose
  • Operating ambient & media temperature: -10° C to +70° C
  • Protection class: IP65 per DIN EN 60529
  • Electrical output: 4-20mA or 0-10V, 3 – wire
  • Power supply: 24 V DC/ AC
  • Switching contacts: 2 sets of programmable voltage free contacts: NO or NC
  • Display: 3 1/2 digit LED
  • Electrical connections: two round shell multi-pin connector sockets (M12, male)
  • Material, housing: Polyamide PA 6.6
  • Materials, media contact: Silicon, PVC, aluminum, brass

Application areas:

  • Roll band filter monitoring
  • Vacuum system monitoring
  • Chimney draught measurement
  • Flow and control pressure monitoring
  • Surface coating system
  • Pump monitoring and control
  • Compressor monitoring and control

Industrial areas:

  • Air conditioning and ventilation systems
  • Auditorium, office, conference rooms
  • HVAC and ventilation application
  • Environment monitoring
  • Clean room and laboratory rooms