Fischer DE39 – GL approved DP Transmitter – Configurable Output Signals

Fischer DE39 is Germany Lloyd type approved DP Transmitter for liquids, contaminated liquids, water, gases for pressure, differential pressure and partial vacuum monitoring. DE39 comes with large LCD display, 2 independent adjustable switching contacts, PC configurable pressure units, measuring range and signal output, with conversion table.

Description

Fischer DE39 – GL approved DP Transmitterpdf-image – liquid, Gas

German lloyd approved, DP Transmitter for liquid, water, gases, with adjustable relay contacts, with LCD Display
Make: Fischer Messtechnik (Germany)
Model: DE39

Fischer DE39 is German Lloyd approved differential pressure transmitter for liquids, water and gaseous media. With its inbuilt microprocessor based electronics, it offer user-configurable signal conversion feature, with programmable signal output with scaling, linearisation, inversion and offset adjustment.

DE39 comes with two independent limit contacts with adjustable set point and also bright large LCD display.

Fischer DE39 - GL Approved DP Transmitter - Water, liquid, Gas
Fischer DE39 – GL Approved DP Transmitter – Water, liquid, Gas

Working Principle:

DE39 is based on microprocessor based electronic module which process analog signals received from integrated pressure sensors. This electronic module compute pressure difference, which can be displayed and processed. The interpretation allows to set two independent switching points and provides an electrical output signal proportional to differential pressure.

Integrated pressure transmitters are based on ceramic measuring system.

Key Features:

  • Type tested according to German Lloyd directives, test mark No. 59 364-08 HH
  • User selectable pressure units
  • 2 x independent limit switching contacts with choice of logic modes
  • Digitally programmable zero adjustment and filtering
  • Analog signal output, with user-programmable scaling, linearisatoin, inversion and offset adjustment
  • User defined signal conversion look-up table(up to 30 points)
  • Fully programmable via PC based EU03 module
  • Optional: Separate display of each pressure
  • Large LCD Display

Key Specifications:

  • Measuring range: 0 ~ 6.0 bar up to 0 ~ 40 bar
  • Nominal pressure (static operating pressure): 6 bar to 40 bar
  • Straight line deviation error (max): 2.5 % full scale
  • Pressure connection: G 1/8 female threads with optional cutting ring fittings for 6 or 8 mm tube
  • Operating ambient temperature: -10° C to +70° C
  • Operating media temperature: -10° C to +80° C
  • Protection class: IP65 per DIN EN 60529
  • Electrical output: 4-20mA or 0-10V, 3 – wire
  • Power supply: 24 V DC/ AC
  • Switching contacts: 2 sets of programmable voltage free contacts: NO or NC
  • Display: 3 1/2 or 4-digit LCD
  • Material, housing: Polyamide PA 6.6 (GL – variant: Lexan Resin 640A)
  • Materials, media contact: Stainless Steel 1.4305, VITON, ceramics (AL2O3, 96%)

Application areas:

  • Differential pressure measurement of highly contaminated media
  • Filter condition monitoring
  • Hydrostatic level measurement
  • Pump monitoring and control
  • Compressor monitoring and control

Industrial areas:

  • Air conditioning and ventilation systems
  • Auditorium, office, conference rooms
  • HVAC and ventilation application
  • Environment monitoring
  • Clean room and laboratory rooms