Fischer DE03 – Accurate, rugged DP Transmitter – aggressive media

Fischer DE03 combines electronic measurement with a rugged sensor design, resulting in high accuracy, high
differential and static rating, and ability to handle difficult media.

It is available with local digital readout and electronic limit detection relays, with measuring range of 0 – 40 mbar to 0 – 25 bar, with analog linear / square root output.

Description

Fischer DE03 – Electronic DP Transmitter pdf-image

high accuracy, high pressure rating for aggressive and difficult media
Make: Fischer Messtechnik (Germany)
Model: DE03

Fischer DE03 is high accuracy, high pressure rating, rugged pressure measuring instrument for differential pressure, absolute pressure and partial vacuum. With industry standard analog output, it can easily integrate with SCADA, BMS or PLC system.

It is suitable for installed with any aggressive or non-aggressive liquid and gas media eg. water, effluent, sewage, hot water, steam, alcohol etc

Working Principle:

Differential pressures are applied on outer flexible stainless steel isolating diaphragms, at opposite ends of the sensing capsule. A third diaphragm in between acts as the sensing element.

The cavity of the capsule is filled with hydraulic fluid, and is divided into two separate parts by the central sensing diaphragm. Pressures acting on the outer diaphragms are transferred to the sensing diaphragm by the fluid, through apertures in the intermediate plates. An axial metal rod joined to the sensing diaphragm forms the core of a precision LVDT displacement sensing element.

When pressures are equal on both sides of the sensing diaphragm, it is at zero position. Pressure difference across the sensing diaphragm causes it to deflect away from the higher pressure side, resulting in linear displacement of the LVDT core. This displacement is sensed by the LVDT’s coils, and converted by an electronic module to an output signal proportional to the pressure differential.

Inward deflection of each isolating diaphragm is limited by the intermediate plate behind it. This also limits the pressure that can be transferred to the sensing diaphragm, and through it, to the isolating diaphragm on the other side. Thus, all three diaphragms are fully protected against excess differential pressure in either direction, and also against high static pressures.

Fischer DE03 - corrosion resistant DP Transmitter - liquids, water, gases
Fischer DE03 – corrosion resistant DP Transmitter – liquids, water, gases

Key Features:

  • Rugged, wear  & tear resistant sensor design
  • High corrosion resistant
  • Low hysteresis
  • Unaffected by vibration, radiation, dirt etc

Key Specifications:

  • Measuring range:  0 ~ 40 mbar to 0 ~ 25 bar
  • Nominal pressure rating: 100 bar
  • Maximum static pressure: 100 bar
  • Maximum differential overpressure: upto max. static pressure; pressure differential in either direction
  • Operating temperature: Ambient: -10 °C to +70 °C;
  • Permanent media temperature: -15 °C to +70 °C
  • Protection class: IP54 per DIN EN 40050
  • Output signal: (0) 4 – 20mA, 0 – 10 V, square root conversion accuracy
  • Display: 3 1/2 digit LCD
  • Accuracy: +/- 1.6% full scale
  • Diaphragm (isolating / sensing): Stainless steel 1.4571. Optional: Hastelloy-C
  • Seals: Viton (fluorocarbon elastomer). Optional: PTFE coated

Application areas:

  • Water and effluent treatment plants, and other filtration applications
  • Filter condition monitoring
  • Flow monitoring in sprinkler systems
  • Flow measurement of steam and hot water, using differential pressure flow sensors, in remote heating systems
  • Monitoring pressure drop across valves
  • Pump Control dependent on differential pressure in block unit heating power stations

Application areas:

  • Manufacturing and chemical plants
  • Marine, shipping application
  • Onshore and offshore area
  • Petrochemical, solvent industry
  • Sewage, effluent treatment plants